SPINA-BAC® Ergonomic Back Cushion is unique patented adjustment mechanism and special steel springs adjust in height and depth to the contours of you back to keep your "S" curve.
SPINA-BAC® is very useful when traveling by car, airplane or train to give yourself the proper lumbar support for your spine. Also, it's a perfect office chair back support.
A long trip will no longer be painful while using the SPINA-BAC® for support.
This lumbar support has especial steel springs and polyurethane foam padding combine the soft fabric cover to provide superb comfort.
Adjustable in six different positions using the patented regulator axle.
NEW PHONE NUMBER : +1 561 894 7092
Adjust SPINA-BAC® to your own back
Unzip some inches on each side of your SPINA-BAC®. Turn the regulator axle 90-degrees using both hands. The axle will then stand with the high side vertical to the plastic baseplate. Check that the cylindrical part of the axle is placed in the middle notch on each side of the baseplate.
Place your SPINA-BAC® in a chair and sit down with your back firmly against It and feel If you are sitting comfortably.
If you feel that you need to adjust SPINA-BAC® to better suit your own individual BACK-CURVE do the following: Move the regulator axle up- or downwards and place It In one of the other two notches on the side of the baseplate. By doing so you move the highest point of the S-Curve higher up or lower down on your SPINA-BAC®.
If you find the S-curve too deep to be comfortable just turn the regulator axle down parallel to the baseplate and your SPINA-BAC® will be more flat.
When your SPINA-BAC® is comfortably adjusted to your own back-curve, use it whenever you sit but make sure that you always keep it tight against your back.
By doing so you can relax - HALF-LYING - IN A CHAIR WITH FULL SUPPORT TO YOUR BACK.
Sitting without backpain
SPINA-BAC® has a rigid base plate, 5 special steel springs and an adjustment mechanism that adjusts in height and depth to the contours of your back. High quality polyether padding and elegant fabric cover in 4 different colours give excellent comfort and durability. Ergonomic design, firmness and adjustability enables you to sit safe and well supported, wherever you sit.
Spina-Bac has been developed to retain the natural S-shape of the spine during sitting. The practical backrest has a robust and solid design, so that it easily supports the weight of the entire upper body. The Spina-Bac cushion can be individually and easily adapted to the needs of your back. Choose the most comfortable sitting angle and adjust the cushion. This allows you to virtually optimize each seat and to keep the S-shape of your spine.
The SPINA-BAC® cushions are equipped with a regulator with notches that allow you to adjust the height and depth of the back support with 6 different settings. Thanks to this built-in regulating mechanism, you can easily and quickly adjust the desired support spots on your back. Every spine is different. The characteristic of the S-shape varies from 2 to 4 cm. This individual shape can only be retained with the help of a support cushion like the Spina-Bac cushion that offers various possibilities of adaptation.
SPINA-BAC® is FDA Registered # 3005674516, patented in United States, Canada and Great Britain.